单选题

Your Director of Security asks you to assign AOS-CX switch management roles to new employees based on their specific job requirements After the configuration was complete, it was noted that a user assigned with the administrators role did not have the appropriate level of access on the switch. The user was not limited to viewing nonsensitive configuration information and a level of 1 was not assigned to their role Which default management role should have been assigned for the user?

A、

sysadmin

B、

operators

C、

helpdesk

D、

config

下载APP答题
由4l***no提供 分享 举报 纠错

相关试题

单选题 You are doing tests in your lab and with the following equipment specifications

AP1 has a radio that generates a 10 dBm signal

AP2 has a radio that generates a 11 dBm signal

AP1 has an antenna with a gain of 9 dBi

AP2 has an antenna with a gain of 12 dBi.

The antenna cable for AP1 has a 2 dB loss

The antenna cable for AP2 has a 3 dB loss

What would be the calculated Equivalent Isotropic Radiated Power (EIRP) for AP1?

A、

26 dBm

B、

30 dBm

C、

17 dBm

D、

-12 dBm

单选题 You need to have different routing-table requirements with Aruba CX 6300 VSF configuration Assuming the correct layer-2 VLAN already exists how would you create a new OSPF configuration for a separate routing table?

A、

Create a new OSPF area, and attach VRF name.

B、

Create a new OSPF process ID with vrf name.

C、

Attach a new OSFP process ID with a custom routing table

D、

Attach OSPF process ID in the VRF configuration.

单选题 A system engineer needs to preconfigure several Aruba CX 6300 switches that will be sent to a remote office An untrained local field technician will do the rollout of the switches and the mounting of several A5s and A5S. Cables running to the APs are not labeled. The VLANs are already name preconfigured to VLAN 100 (mgmt), VLAN 200 (clients), and VLAN 300 (guests) What is the correct configuration to ensure that APs will work properly?

A、

B、

C、

D、

单选题 A new network design is being considered to minimize client latency in a high-density environment. The design needs to do this by eliminating contention overhead by dedicating subcarriers to clients. Which technology is the best match for this use case?

A、

OFDMA

B、

MU-MIMO

C、

QWMM

D、

Channel Bonding

单选题 Which feature supported by SNMPv3 provides an advantage over SNMPv2c?

A、

Transport mapping

B、

Community strings

C、

GetBulk

D、

Encryption

单选题 With Aruba CX 6300,how do you configure ip address 10.10.10.1 for the interface in default state for interface 1?

A、

int 1. switching, ip address 10.10.10.1

B、

int 1. no switching, ip address 10.10.10.1

C、

 int 1. ip address 10.10.10.1

D、

 int 1. routing, ip address 10.10.10.1

单选题 Your manufacturing client is having installers deploy seventy headless scanners and fifty IP cameras in their warehouse These new devices do not support 802 1X authentication. How can HPE Aruba reduce the IT administration overhead associated with this deployment while maintaining a secure environment using MPSK?

A、

Have the installers generate keys with ClearPass Self Service Registration

B、

Have the MPSK gateway derive the unique pre-shared keys based on the MAC OUI.

C、

Use MPSK Local to automatically provide unique pre-shared keys for devices.

D、

MPSK Local will allow the cameras to share a key and the scanners to share a different key

单选题 Which component is used by the Aruba Network Analytics Engine (NAE)?

A、

JSON-based scripts

B、

Lisp-based agents

C、

Ruby-based scripts

D、

Current State Database