首页  /  试题详情

单选题 制造商可以建立程序，当相符时，对发现的不适航情况提供反馈。

A、 The vendor can build programs to supply response to worthless Conditions found in compliance with regulations.
B、 The manufacturer may establish procedures to provide feedback on Unairworthy conditions that were discovered when complying.
C、 The manufacturer may create a process to give feedback on abnormal Conditions when it's conformed.
查看答案
下载APP答题
由4m***u1提供 分享 举报 纠错
题库推荐
2800-2899
2026-05-08
共100道

相关试题

单选题 在正常或异常的情况下，这些指令是必需的，例如从柔软的地面、湿滑的或结冰的表面上拖拽飞机并且在发动机被拆除或飞机损坏的状况下。

A、These instructions are required for towing aircraft in normal or abnormal conditions, such as from soft ground, wet or icy surfaces and in the case of engine is removing or aircraft is damaging.
B、These instructions are necessary for towing the aircraft under normal or abnormal conditions, such as from a wet or icy surface on a soft ground and when the engine is removed or the aircraft is damaged.
C、These instructions are necessary to tow or push the aircraft in normal or abnormal conditions such as towing from soft ground and slippery or icy surfaces, with engines removed, or aircraft damaged.

单选题 使用单词前，应先阅读字典中“经批准词义”栏中的定义。

A、Before you use a word, read its definition in the approved meaning Column of the dictionary.
B、Before you use a word, read its approved meaning in the definition Column of the dictionary.
C、Before you use a word, read its meaning in the approved column of The dictionary definition.

单选题 永远记住，STE的主要目的是让读者立即理解他们所读的每句话。

A、Always remember that the main subject of STE is for readers to Hardly grasp each sentence they read.
B、Always remember that the major function of STE is to let readers Comprehend every sentence they read barely.
C、Always remember that the primary objective of STE is that readers Immediately understand each sentence that they read.

单选题 本节必须列出型号合格审定所需的每个强制更换时间、结构检验间隔和相关的结构检查程序。

A、This section must list the relevant structural inspection procedures Required for each mandatory replacement time, structural inspection interval And model qualification validation.
B、This section must provide the corresponding structural inspection Procedures required for each mandatory replacement time , structural inspection Interval and type qualification.
C、This section must set forth each mandatory replacement time, Structural Inspection interval, and related structural inspection procedure required for Type certification.

单选题 句子形式应该简单直接，除对实际理解和应用有必要外，省略对理论的讨论。

A、Sentence forms shall be simple and direct ,omitting discussions of Theory except where essential for practical understanding and application.
B、The sentence form should be easy and direct, avoiding discussion of Theory except when practical understanding and application are necessary.
C、The form of a sentence should be simple and direct, and the Discussion of theory should be omitted in addition to practical understanding And application.

单选题 封面标题应为“飞行员操作手册”或“飞行员操作手册和FAA批准的飞机飞行手册”。

A、The cover title shall be "Pilot's Operating Handbook" or "Pilot's Operating Handbook and FAA Approved Airplane Flight Manual".
B、The topic cover shall be "Pilot's Controlling Manual" or "Pilot's Controlling Manual and FAA Accepted Airplane Flight Manual".
C、The page topic shall be "Pilot's Managing Handbook" or "Pilot's Managing Handbook and FAA Authorized Airplane Flight Manual".

单选题 扰流板用于增加飞行中的飞机阻力，或在着陆期间以及中断起飞的情况下破坏升力。

A、Spoilers are used to increase the drag of the aircraft in flight, or to interrupt lift during landing and during rejected take-off.
B、Spoilers are used to enhance aircraft resistance in flight or to disrupt boost during landing and when take-off is canceled.
C、Spoilers are used to increase the aircraft drag in flight, or destroy the lift during landing and in case of aborted take-off.

单选题 两个活门上的旋转螺母都与内部阀杆上的螺纹啮合，从而使阀杆松开或拉紧到金属阀座。

A、The swivel nuts on both valves engage threads on an internal stem That loosens or draws tight the valve stem to a metal seat.
B、The rotating nuts on both valves are meshed with the threads on the Inner valve stud, so that the valve stud is loosened or tightened to a metal Valve base.
C、The swing nuts on both valves engage with the threads on the Internal spool, allowing the spool to loosen or tighten to the metal seat.